Sper Scientific 850061 pH SD Card Datalogger Kit - Manual (Page 32)

- 32 -
DATALOGGER
3. Press LOGGER.
“DATALOGGER” will flash on the
LCD and the alarm will sound
while the measurement data and
time information are saved to
memory.
4. To pause datalogging, press
LOGGER. The meter will
temporarily stop recording and
“DATALOGGER” will stop flashing
on the LCD. Press LOGGER
again to resume datalogging.
“DATALOGGER” will flash on the
LCD.
5. To finish datalogging, pause the
datalogger. Press REC for 2
seconds or longer. “REC” will
disappear from the LCD to
indicate that datalogging has
ended.
Note
To enable/disable the touch-tone
feature, see page 16.