Sper Scientific 850061 pH SD Card Datalogger Kit - Manual (Page 31)

- 31 -
DATALOGGER
Preparing the Datalogger
1. Insert the SD card into the SD
card socket on the bottom of the
meter, ensuring that the front of
the SD card faces the back of the
meter.
2. Format the SD card as needed
(see page 13).
3. Set the clock if using the meter for
the first time (see page 14).
4. Set the decimal type if using the
meter for the first time (see page
17.)
Auto Datalogging
1. Set the sampling time to ≥ 1
second. Refer to page 15.
2. Press REC. “REC will appear on
the LCD.