Sper Scientific 850061 pH SD Card Datalogger Kit - Manual (Page 18)

- 18 -
SETUP MODE
save the selection.
Manual Temperature
Compensation Value (pH only)
1. Enter the manual temperature
compensation function from Setup
Mode (see page 13). “t-SEt”
appears on the LCD.
2. Press ▲ or ▼ to adjust the value
to the desired selection (in °C or
°F). Press ENTER to save the
selection.
Note
After completing this function, press
SET to advance to the next function.
“ESC” appears on the LCD. Press
ESC to complete the setup
procedures and return to Normal
Mode.