Sper Scientific 850061 pH SD Card Datalogger Kit - Manual (Page 25)

- 25 -
Preparing the pH/ORP Probe
1. Remove the pH or ORP probe
soaker bottle by rotating the bottle
and cap and slide the bottle and
cap off the probe.
2. Rinse the probe tip with
de-ionized or distilled water before
use.
Note
If the probe tip is dehydrated, soak it
for 30 minutes in a KCl solution. DO
NOT wipe the pH probe dry. Wiping
the probe may cause static and
cause measurement instability.
pH Measurement with Manual
Temperature Compensation
1. Press POWER to turn the meter
on.
2. Using a pH probe, plug the probe
plug into the pH probe socket.
3. Adjust the manual temperature
MEASUREMENT
PROCEDURES