Sper Scientific 850061 pH SD Card Datalogger Kit - Manual (Page 17)

- 17 -
SETUP MODE
Decimal Type
Although the decimal is commonly
expressed as the “.” symbol (i.e., 20.6
or 1000.53), some (European)
countries use a “,” symbol to
represent the decimal (i.e., 20,6 or
1000,53). The meter defaults to the
period symbol. To adjust:
1. Enter the decimal type function
from Setup Mode (see page 13).
“dEC” appears on the LCD.
2. Press ▲ or ▼ to select Basic (.)
or Euro (,). Press ENTER to save
the selection.
Temperature Units
1. Enter the temperature units
function from Setup Mode (see
page 13). “t-CF” appears on the
LCD.
2. Press ▲ or ▼ to select C
(degrees Celcius) or F (degrees
Farhenheit). Press ENTER to