Sper Scientific 850061 pH SD Card Datalogger Kit - Manual (Page 33)

- 33 -
DATALOGGER
Manual Datalogging
1. Set the sampling time to 0
seconds. Refer to page 15.
2. Press REC. “REC” will appear on
the LCD.
3. Press LOGGER.
“DATALOGGER” will flash on the
LCD and the alarm will sound
while the measurement data and
time information are saved to
memory. The position (location)
number will appear on the bottom
of the LCD and will also be
recorded on the SD card.
Note
To enable/disable the touch-tone
feature, see page 16. Press ▲ or ▼
to set the position number (from 1 to
99). To indicate the position location,
P x (x = 1 to 99) will appear on the
lower display.
4. To finish datalogging, press REC