GReddy TURBO KITS: Honda S2000 (AP2) 2004-06 / T518Z - Manual (Page 15)

― １５―
(2)
Install the downpipe to the turbine housing using
#61 turbine gasket, secure with provided nuts and
lock washers.
※
Use factory spring bolts to attach the downpipe to
the catalytic converter.
〈
Parts used: 61
〉
(3)
Use the factory exhaust manifold bracket to
support the downpipe.
※
Use the factory bolt on the transmission side, use
#92 nut/bolt to secure the downpipe to the
bracket.
〈
Parts used: 92
〉
3-6 Vacuum Piping
(1)
Remove the breather/coolant pipe. Have a towel
or rag ready to catch the coolant that will spill out
from the port below the throttle body.
(2)
Use #44
８ φ
hose to connect the coolant
passages as shown. Secure the ends with the
provided #53 hose clamps.
〈
Parts used:44
，
53
〉
Factory EX
Bracket
B reather/Water
P ipe Assy.
№29