GReddy TURBO KITS: Honda S2000 (AP2) 2004-06 / T518Z - Manual (Page 26)

― ２６―
3-16 Bumper and Under-Cover Modification
(1)
The factory under-covers and fender liners need to be cut in order to accommodate the intercooler
piping. Cut the areas as shown.
Front engine undercover Rear engine undercover
Passenger side fender liner Driver side fender liner
(2)
The bumper needs to be trimmed slightly in order to make clearance for the intercooler core. Trim
the areas of the inner grill that are highlighted in the picture below.