GReddy TURBO KITS: Honda S2000 (AP2) 2004-06 / T518Z User Manual
Page 24
― 24―
(8)
Use the provided spacers under the brackets
marked A in the image (use on the intake manifold
side). Use the provided extended bolt in place of
the factory bolt to accommodate for the added
length.
〈
Parts used:
11,
86
〉
3
-
-
-
-
14
Factory Pressure Sensor Relocation
(1)
Remove the factory pressure sensor and replace it
with the provided pressure sensor adapter.
※
Use factory hardware for installation.
〈
Parts used: 72
〉
(2)
Attach the factory pressure sensor to #71 bracket.
Secure using #81 nuts/bolts.
〈
Parts used: 71,81
〉
(3)
Attach the sensor and bracket to the fuel rail
bracket pictured.
(4)
Attach the provided vacuum hose from the
pressure sensor adapter to the pressure sensor.
Secure both ends of the hose with zip ties.
〈
Parts used: 43,79
〉
A
Vacuum nipple
№ 81