GReddy TURBO KITS: Honda S2000 (AP2) 2004-06 / T518Z User Manual
Page 21
― 21―
(3)
Install the Compression tubes C-4, C-5 from
intercooler outlet to the throttle body as shown.
Compression Tube
C-
C-
C-
C-4
4
4
4
Secure the bracket to the air pump bracket
with the provided nut/bolt #89.
Compression Tube
C-
C-
C-
C-5
5
5
5
Longer straight side connects to throttle body.
※
Route the tube so that it would not hit or rub up on
the air pump bracket or the electric fan.
〈
Parts used No.9
,
10
,
49
,
50
,
52
,
58
,
59
,
89
〉
3-11 Baffle Plate Installation
(1)
Remove the factory intake manifold bracket and
install the #69 stay as shown using hardware #84.
〈
Parts used: 69, 84
〉
(2)
Insert a zip tie through the baffle plate as shown in
the picture. Remove the right side radiator
bracket and install the baffle plate. Use the
provided clips to secure the baffle plate, to the
bulkhead, upper frame, and vacuum tank bracket
(3 points).
〈
Parts used:
1
8
,
76
,
80
〉
※
Position the baffle plate and vacuum tank bracket
so there is clearance between the plate and the
compression tube and radiator.
№69
№18
Air Pump
B racket
C-4
C-5
C-4