GReddy TURBO KITS: Honda S2000 (AP2) 2004-06 / T518Z - Manual (Page 20)

― ２０―
3-10 Intercooler Piping
(1)
Install #75 rubber vibration mount to the factory
hole on the chassis as shown.
〈
Parts used: 75
〉
(2)
Install hose fitting
５ φ － １
/
８ Ｐ Ｔ
#73 to
compression pipe C-1.
※
Be sure to use Teflon tape on the threads of the
hose fitting.
〈
Parts used: 6,73
〉
(3)
Cut provided vacuum hose to 200mm and route it
between the actuator and C-1 and secure the
hose with zip-ties.
〈
Parts used: 43
，
80
〉
(4)
Install Compression tube C-1, C-2, C-3 from turbo to
intercooler inlet as shown. Use C-1 Gasket #63.
Compression Tube
Ｃ－ Ｃ－ Ｃ－ Ｃ－２ ２ ２ ２
Using the provided #87 flange nut, secure the
tube to the vibration rubber stub as shown.
Compression Tube
Ｃ－ Ｃ－ Ｃ－ Ｃ－３ ３ ３ ３
The shorter straight side is intercooler side.
〈
Parts used No.6,7,8,48,49,51,57,58,63,87,90
〉
№73
№ 75
C -2
C-1
C -2
C -3
C -2
C -3
Secure
here