GReddy TURBO KITS: Honda S2000 (AP2) 2004-06 / T518Z User Manual
Page 19
― 19―
(2)
Install suction pipe S-1 to the compressor housing
using the provided #62 gasket. Be sure that the
bracket on the pipe is positioned onto the rubber
vibration mount previously installed. Secure S-1 at
the compressor housing with the provided #90
hardware. Secure S-1 at the bracket and vibration
mount with the provided #87 nut.
〈
Parts used:
5,
62
,
87
,
90
〉
Install the
12φ
oil resistant hose #45 from the valve
cover breather nipple to the nipple on the S-1 suction
pipe. Use provided hose clamps #54 to secure both
ends of the hose.
〈
Parts used: 45
,
54
〉
※
Install the provided
1 9 φ
hose (#47) to the air
pump OUT hose using union #74. Secure the
other end of the hose to the suction pipe S-1. Use
provided #56 hose clamps to secure both ends of
the hose, as well as the end of the air pump OUT
hose (3 hose clamps used total).
〈
Parts used: 47
,
56
,
74
〉
№ 45
№47
№74
Zip Tie here
S-1
Rubber
Mount