Kenwood TK-5210G/5310G - Manual (Page 17)

9
I
NSTALLING THE
C
AP OVER THE
U
NIVERSAL
C
ONNECTOR
1 If you are not using an
optional speaker/
microphone or headset,
install the cap over the
universal connector.
2 Secure the cap in place
using the attached screw.
Universal
connector cap
I
NSTALLING THE
(O
PTIONAL
) S
PEAKER
/ M
ICROPHONE OR
H
EADSET
Optional
speaker/ microphone
1 Insert the guide of the
speaker/ microphone or
headset connector into the
groove of the universal
connector.
2 Secure the connector in
place using the attached
screw.
Note: When not using an optional
speaker/ microphone or headset,
install the cap over the universal
connector.