Clock (k2 and k3 models only) – Kenwood TK-5210G/5310G User Manual
Page 47
39
CLOCK (K2 and K3 Models Only)
If activated by your dealer, your transceiver can track the time
with its built-in clock. The time will display momentarily when
the transceiver power is turned ON. Additionally, you can
view the clock any time by pressing the key programmed as
Clock.
Note: Removing or leaving the battery pack uncharged for extended
periods will cause the clock time to clear.
C
LOCK
A
DJUSTMENT
To set the time:
1
With the transceiver power OFF, press and hold the
Auxiliary (orange) key and the PTT switch while turning
the transceiver power ON.
•
The current time setting appears.
2
Release the Auxiliary (orange) key, followed by the PTT
switch.
3
Press the Side 2 and Side 3 keys or the D> and <C keys
to increase or decrease the year setting.
4
Press the A key to set the year.
•
The transceiver cycles to the month setting.
5
Repeat steps 3 and 4 to set the month, day, hour, and
minute.
6
Turn the transceiver power OFF and then back ON to
return to normal operation.