Kenwood TK-5210G/5310G - Manual (Page 41)

33
SCRAMBLER (FM)/ ENCRYPTION (APCO)
Note:
◆ The Scrambler function can be used only in Conventional FM
Operation. Additionally, the Voice Scrambler board must be
installed before this function can be activated.
◆ Ask your dealer for details concerning the Voice Scrambler board
and the Encryption DES/AES settings.
S
ECURE
(E
NCRYPTED
) T
RANSMISSION
Press the key programmed as Scrambler/ Encryption to
switch the transceiver to secure (encrypted) transmission.
• On K2 and K3 model transceivers, the icon appears when the
Scrambler or Encryption function is turned ON.
• Pressing the PTT switch after the Scrambler or Encryption
function has been turned ON encrypts the transmitted signal.
• Each group member must activate their respective Scrambler/
Encryption functions to descramble the received signals.
S
ELECTING THE
S
CRAMBLER
C
ODE
1 Press the key programmed as Scrambler/ Encryption
Code (K2 and K3 Models Only) or press and hold the key
programmed as Scrambler/ Encryption for 1 second, to
enter Code Selection Mode.
2 Press the Side 2 and Side 3 keys or the D> and <C keys
to increase or decrease the Scrambler code.
• There are 16 available Scrambler codes (1 ~ 16).
• Each group member must use the same code in order for the
transceivers to descramble the received signals.
3 Press the Side 1 key to set the new Scrambler code.