Kenwood TK-5210G/5310G - Manual (Page 29)

21
■ Making Group Calls (APCO)
Channels programmed for APCO operation already have a
Group ID assigned. For these channels, you do not need
to perform steps 1 to 3, below.
Otherwise, on K2 and K3 model transceivers, if a key has
been programmed with Talkgroup, you can select a group
ID from the list to make a call to those parties.
1
Press the key programmed as Talkgroup.
2 Press the Side 2 and Side 3 keys or the <C and D>
keys to select a group ID/name from the list that has
been pre-entered into your transceiver.
• The target group ID/name appears on the display.
3 Press the Side 1 key to set the selected group ID.
4 Press and hold the PTT switch to make the call.
Speak into the transceiver as you would during a
normal transmission.
■ Making Individual Calls (APCO) (K2 and K3 Models Only)
If a key has been programmed with Individual, you can
make calls to specified persons.
1
Press the key programmed as Individual.
2 Press the Side 2 and Side 3 keys to select a unit ID
from the list that has been pre-entered into your
transceiver.
• Alternatively, on K3 models, you can directly enter a unit
ID by using the DTMF keypad.
• The target unit ID/name appears on the display.
3 Press and hold the PTT switch to make the call.
• Speak into the transceiver as you would during a normal
transmission.