Kenwood TK-5210G/5310G - Manual (Page 26)

18
BASIC OPERATIONS
S
WITCHING
P
OWER
ON/ OFF
Turn the Power switch/ Volume control clockwise to switch
the transceiver ON.
Turn the Power switch/ Volume control counterclockwise to
switch the transceiver OFF.
■ Transceiver Password
K2 and K3 model transceivers may be password protected.
If the transciever is protected, “INPUT PASSWORD” will
appear on the display when the power is turned ON. To
unlock the transceiver, enter the correct password:
1 Enter a character using the Side 2 and Side 3 keys.
• On K3 model transceivers, you can enter the password by
pressing the DTMF keys instead.
2 Press the D> key (SET) to accept the character.
• This step is unnecessary when using the keypad.
3 Repeat steps 1 and 2 to enter the entire password.
• Press the B key (DEL) to delete an incorrectly entered
character. Press and hold the B key to delete all
characters.
4 Press the A key (CNF) to confirm the entry.
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
• The password can contain a maximum of 6 digits.