K3 m – Kenwood TK-5210G/5310G User Manual
Page 39
31
A
UTODIAL
(K2
AND
K3 M
ODELS
O
NLY
)
Autodial allows you to quickly call DTMF numbers that have
been programmed onto your transceiver.
1
Press the key programmed as Autodial.
•
The first entry in the Autodial list appears on the display.
2
Press the Side 2 and Side 3 keys or enter the appropriate
DTMF number (01 ~ 32) to select your desired Autodial list
number.
•
The stored entry appears on the display.
3
Press the PTT switch to make the call.
•
Alternatively, you can press the <C key to transmit the
selected DTMF number, rather than making a call.
S
TUN
C
ODE
This function is used when a transceiver is stolen or lost.
When the transceiver receives a call containing a stun code,
either transmit mode will be disabled, or both receive mode
and transmit mode will be disabled. The stun code is
cancelled when the transceiver receives a call with a revive
code.