Kenwood TK-5210G/5310G User Manual
Page 28
Advertising
20
T
RANSMITTING
1
Select the desired zone and channel using the selector
knob and the Zone Up/ Zone Down or Channel Up/
Channel Down keys.
2
Press the key programmed as Monitor or Squelch Off to
check whether or not the channel is free.
•
If the channel is busy, wait until it becomes free.
3
Press the PTT switch and speak into the microphone.
Release the PTT switch to receive.
•
The LED indicator lights red while transmitting and green
while receiving a signal. This indicator can also be disabled
by your dealer.
•
For best sound quality at the receiving station, hold the
microphone approximately 1.5 inches (3 ~ 4 cm) from your
mouth.
Advertising