Kenwood TK-5210G/5310G - Manual (Page 27)

19
A
DJUSTING THE
V
OLUME
Rotate the Power switch/ Volume control to adjust the
volume. Clockwise increases the volume and
counterclockwise decreases it.
S
ELECTING A
Z
ONE AND
C
HANNEL
Select the desired zone using the selector knob or the keys
programmed as Zone Up/ Zone Down. Each zone contains
a group of channels
Select the desired channel using the selector knob or the keys
programmed as Channel Up/ Channel Down. Each channel
is programmed with settings for transmitting and receiving.
• The default setting for the selector knob is Channel Select.
K2 and K3 model transceivers may have names programmed
for zones and channels. Each name can contain up to 16
character. While selecting a zone, the zone name will appear
above the channel name for approximately 2 seconds.
• If programmed by your dealer, your transceiver will announce the
zone and channel numbers as you change them.