MagTek InSpec 9000-2005 - Manual (Page 29)

Section 3. Operation
19
used with the InSpec 900-2005 software to copy cards read by the InSpec reader. IntelliStripe
380 is an optional addition to the InSpec 9000 to allow testing of cards at a point before they
would normally be encoded.
HELP
Contents:
This button and menu item opens this manual.
About:
This menu item gives the user version information for the InSpec 9000 software and connected
hardware.
Keywords
Keywords are used to enable sorting of data in the database. A single InSpec 9000 reader may be
used by multiple users, for multiple encoders, with multiple card stock, during multiple shifts.
Without a way to sort this data, the database would be nearly useless. The keywords allow the
user to look at only the data that is needed. Ensure that the three selected keywords properly
represent the card that is about to be read. After the card has been read, the keyword for that read
can not be altered. See Section 4, Data Charts.
Card Summary
The card summary shows the worst result from the overview chart for each track. If the indicator
for a track is green, then all parameters for that track are within the new card limits. If one or
more parameters exceed the new card limits, but none exceed the returned card limits, then the
indicator will be yellow. A red indicator means that one or more parameters have exceeded the
returned card limits. The card summary is updated for every read, but is most useful in quick
mode where the overview chart is not automatically displayed.