Aalborg PWE Digital - Manual (Page 47)

42
4.7.2 Pilot Totalizer Flow Start Numerical entry
The Pilot Totalizer Start Flow value can be entered in increments of 0.1% from
0.0 – 100.0%F.S. A typical display with flow meter Pilot totalizer Start Flow set-
tings is shown below.
4.7.3 Pilot Totalizer Event Volume Numerical entry
Pilot Totalizer Event Volume value must be entered in currently active volume /
mass based engineering units. Totalizer action event become true when the total-
izer reading and preset "Event Volume" values are equal.
If the Totalizer Event at preset total volume feature is not required, then set
Totalizer Event Volume value to zero (default settings). A typical display with flow
meter Pilot Totalizer Event Volume settings is shown below.
4.7.4 Pilot Totalizer Reset Tabular entry
The Pilot Totalizers reading can be reset by pressing ENTER button. A typical dis-
play with flow meter Pilot Totalizer Reset screen is shown below.
The next conformation screen will appear only for 2 seconds.
PT Flow Start
10.0 %F.S.
PT Event Volume
0.0 Gal
Reset Pilot Total
Value?
Press Ent key to
reset Totalizer!