Aalborg PWE Digital - Manual (Page 53)

48
Once Ent button is pressed the next conformation screen will appear only for 2
seconds.
If during these two seconds user will press ENTER button again, the Calibration
Timer value will be reset to zero.
4.10 Submenu LCD Back Light Numerical Entry
This parameter indicates the level (intensity) of the LCD back light. The value of
the LCD back light level can be entered in increments of 1% from 0 - 80%F.S. If
LCD back light is not desired, it can be turn off by setting back light level to zero.
A typical display with LCD Back Light selection is shown below.
4.11 Submenu Alarm Events Log
PWE series Flow Meters are equipped with a self-diagnostic alarm event log which
is available via digital interface and on screen LCD indication (for devices with
optional LCD). A typical display with Alarm Events Log selection is shown below.
Press Ent key to
reset Cal. Timer
LCD Back Light
50 %F.S.
Sub Menu
Alarm Events Log