Aalborg PWE Digital - Manual (Page 57)

52
4.12.1 Submenu Raw Pulses Count
This menu selection provides number of pulses from the flow sensor within spe-
cific measurement interval.
In the example shown above the raw pulses count is 400 within 4000 ms meas-
uring interval, which represents pulse frequency of 100 Hz.
4.12.2 Submenu Pulse Frequency
This menu selection provides raw value of the frequency from the pulse width
measurement circuitry.
4.12.3 Submenu Raw RTD reading (RTD option only)
This menu selection provides raw value of the ADC counts for RTD circuitry. The
reading only applicable for PWE meters with optional RTD functionality.
4.12.4 Submenu DAC_A Flow Output
This menu selection provides current value of the DAC register for analog flow
output circuitry.
Raw Pulses Count
400 T= 4000mS
Pulse Frequency
100.00 Hz
Raw RTD Reading
1250 Counts
DAC_A Output (F)
3125 Counts