Aalborg PWE Digital - Manual (Page 56)

51
4.11.2 Submenu Alarm Events List
This menu selection provides list of the descriptions and corresponding code for
all supported events.
If ENTER is pressed again, the description for each error is displayed:
The shown above Event List selections can be scrolled with the Up and Dn but-
tons. By pressing ENT or Esc buttons user may exit from scrolling mode.
4.11.3 Submenu Alarm Events Log Mask
With this menu selection user may individually mask (disable) any Alarm Event. A
typical display with Alarm Events Mask selection is shown below.
In the example shown above, event 1 (Flow rate more than 125% F.S.) is masked
with asterisk. In order to change event mask settings user should press Ent but-
ton. The flashing cursor will appear on the left of the LCD screen (on the 0 event
position). Use Dn button to move to desired event code. Use Up button to change
mask status (asterisk represent masked event). Use Ent button to accept and save
new mask settings.
4.12 Submenu Diagnostic
This submenu provides troubleshooting information about the meter internal vari-
ables. These items are informational only and may not be changed (read only).
Events List
Press Enter Key
Events List
0-CPU Temp. High
Event Log Mask
0*23456789ABCDEF