Campbell Scientific CR9000X Measurement and Control System - Manual (Page 245)

Section 7. Measurement Instructions
7-21
Parameter Enter SDMCAN PARAMETERS
DataType Value Description
Continued 1 Retrieve data; unsigned integer, most significant byte first
2 Retrieve data; unsigned integer, least significant byte first
3 Retrieve data; signed integer, most significant byte first
4 Retrieve data; signed integer, least significant byte first
5 Retrieve data; 4-byte IEEE floating point number; most significant byte first
6 Retrieve data; 4-byte IEEE floating point number; least significant byte first
7 Build data frame in SDM-CAN memory; unsigned integer, most significant
byte first. Overwrite existing data.
8 Build data frame in SDM-CAN memory; unsigned integer, least significant
byte first. Overwrite existing data.
9 Build data frame in SDM-CAN memory; signed integer, most significant
byte first. Overwrite existing data.
10 Build data frame in SDM-CAN memory; signed integer, least significant
byte first. Overwrite existing data.
11 Build data frame in SDM-CAN memory; 4-byte IEEE floating point
number; most significant byte first. Overwrite existing data.
12 Build data frame in SDM-CAN memory; 4-byte IEEE floating point
number; least significant byte first. Overwrite existing data.
13 Build data frame in SDM-CAN memory; unsigned integer, most significant
byte first. Logical "OR" with existing data.
14 Build data frame in SDM-CAN memory; unsigned integer, least significant
byte first. Logical "OR" with existing data.
15 Build data frame in SDM-CAN memory; signed integer, most significant
byte first. Logical "OR" with existing data.
16 Build data frame in SDM-CAN memory; signed integer, least significant
byte first. Logical "OR" with existing data.
17 Build data frame in SDM-CAN memory; 4-byte IEEE floating point
number; most significant byte first. Logical "OR" with existing data.
18 Build data frame in SDM-CAN memory; 4-byte IEEE floating point
number; least significant byte first. Logical "OR" with existing data.
19 Transmit data value to the CAN-bus; unsigned integer, most significant byte
first.
20 Transmit data value to the CAN-bus; unsigned integer, least significant byte
first.
21 Transmit data value to the CAN-bus; signed integer, most significant byte
first.
22 Transmit data value to the CAN-bus; signed integer, least significant byte
first.
23 Transmit data value to the CAN-bus; 4-byte IEEE floating point number;
most significant byte first.
24 Transmit data value to the CAN-bus; 4-byte IEEE floating point number;
least significant byte first.
25 Transmit previously built data frame to the CAN-bus.
26 Set up previously built data frame as a Remote Frame Response.
27 Read Transmit, Receive, Overrun, and Watchdog errors. The errors are
placed consecutively in the array specified by the Dest parameter.
28 Read Transmit, Receive, Overrun, and Watchdog errors. The errors are
placed consecutively in the array specified by the Dest parameter. Reset
error counters to 0 after reading.