Campbell Scientific CR9000X Measurement and Control System - Manual (Page 416)

Appendix C. PC/CF Card Information
recommend you always use extended temperature tested, Industrial Grade
PC/CF cards with a datalogger.
TABLE C-3. Comparison of Industrial and Commercial Grade Cards
Industrial Grade
Cards
Commercial Grade
Cards
Operating Temperature -40 to +85ºC 0 to +70ºC
Vibration Proofing 30 Gs 15 Gs
Shock Resistance 2000 Gs 1000 Gs
MTBF >3,000,000 hours >1,000,000 hours
Type of NAND Flash Memory SLC MLC typically
but some SLC
All Campbell Scientific products are Electrostatic Discharge (ESD) tested to
ensure that in the event of a static discharge neither the equipment nor the data
is damaged or lost. Campbell Scientific ESD tested several brands of cards,
only the Silicon Systems cards passed this testing. Campbell Scientific
recommends that only Silicon Systems cards be used with Campbell Scientific
CRBasic dataloggers. It is not necessary to purchase the cards directly from
Campbell Scientific, as long as the Silicon Systems card model number
matches Table C-4.
TABLE C-4. Silicon Systems and Campbell Scientific
PC/CF Model Numbers
Card
Type Size
(Mbytes)
Silicon Systems
(model number)
Campbell Scientific
(model number)
CF 64 SSD-C64MI-3038 CFMC64M
CF 256 SSD-C25MI-3038 CFMC256M
CF 1024 SSD-C01GI-3038
CFM1GM
CF 2048 SSD-C02GI-3038 Not Available
PC 1024 SSD-P01GI-3038 Not Available
PC 2048 SSD-P02GI-3038 Not Available
References
1. “Implementing MLC NAND Flash for Cost-Effective, High-Capacity
Memory”, written by Raz Dan and Rochelle Singer, September 2003,
Rev 1.1,
www.data-io.com/pdf/NAND/MSystems/Implementing_MLC_NAND_Flash.pdf .
2. “Advantages of SLC NAND Flash Memory”,
www.mymemory.com.my/SLC%20VS%20MLC.html .
C-2