Campbell Scientific CR9000X Measurement and Control System - Manual (Page 27)

Quick Start
QS4. Data Collection
The Collect window can be accessed from RTDAQ's Collect Data tab.
There are options for setting-up the collection mode, the file mode, and file
format for the data collection process. The file name and path can also be
set here. The default path and name would be:
C:\CampbellSci\RTDAQ\LoggerName_TableName.dat; where
LoggerName = The name user defined name in RTDAQ's network
map.
TableName = The name of the data table in the logger.
Select
AS
w/ Time Stamps and
Record Numbers.
Click off Select All,
select the Batt Data
Table from the list
and then click
Start Collectio
All the Data,
Create New File and
CII Data
on
n.
Once the collection is complete, a Data Collection Results window will
appear. Highlight the Table Batt and click on View File.
Highlight
Batt, and then
click on
ViewFile.
QS-19