Campbell Scientific NL200/NL201 Network Link Interface - Manual (Page 37)

NL200/201 Network Link Interface
• If running NL2xx firmware revision v.4 or greater, you can also type
“eventloga” at the prompt to obtain an ASCII version of the low-level
log. Copy and paste the output into a text file.
• Once the eventlogs have been copied, you can type “eventlog erase”
at the prompt to clear the log. If you want to add a date to indicate
when the logs were last cleared, you can enter “eventlog erase date”
where date is a string of up to 8 characters.
After calling Campbell Scientific for help, email your network description, the
newly created text files, and the saved XML settings file to the application
engineer you are working with.
10. Attribution
PakBus is a registered trademark of Campbell Scientific, Inc.
27