Campbell Scientific NL200/NL201 Network Link Interface - Manual (Page 56)

Appendix C. NL200/201 Settings
TLS Proxy Timeout
This setting, in units of seconds, will determine how fast the proxy server/client
sessions will time out if no activity is detected. Set to 0 for no time-out (not
recommended). (range 0..999)
C.6 TLS Tab
TLS Status (read only)
Specifies the current status of the TLS network stack.
If the status of the TLS stack is “Initialized”, the device will
automatically negotiate a secure TLS connection with DevConfig
if the Use TCP option is selected. The TLS Private Key, Private
Key Password, and TLS Certificate can only be edited/transmitted
over a secure DevConfig link (USB or TLS). These settings
cannot be edited over a standard TCP DevConfig link.
TLS Private Key Password
Specifies the password that is used to decrypt the TLS Private Key.
This setting can only be edited/transmitted if the DevConfig link
is considered secure (USB or TLS). If the TLS stack has been
initialized, the device will automatically negotiate a secure TLS
connection with DevConfig if the Use TCP option is selected.
TLS Private Key
Specifies the private key (in PEM format) for the encryption stack.
This setting can only be edited/transmitted if the DevConfig link
is considered secure (USB or TLS). If the TLS stack has been
initialized, the device will automatically negotiate a secure TLS
connection with DevConfig if the Use TCP option is selected.
TLS Certificate
Specifies the public certificate (in PEM format) for the encryption stack.
This setting can only be edited/transmitted if the DevConfig link
is considered secure (USB or TLS). If the TLS stack has been
initialized, the device will automatically negotiate a secure TLS
connection with DevConfig if the Use TCP option is selected.
NOTE
NOTE
NOTE
NOTE
C-12