Allied Telesis AT-9000 Series - Manual (Page 115)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
115
Displaying Static Trunk Settings
To display the static port trunks for all of the switch ports, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 20 on page 59.
2. From the Switching tab, hover over Link Aggregation.
For an example of the Link Aggregation tab, see Figure 42.
Figure 42. Switching Tab with Link Aggregation Selected
3. Move the cursor to the right and select Static Trunks, as shown in
Figure 43.
Figure 43. Switching Tab with Static Trunks Selected
The Static Trunks page is displayed. See Figure 44 on page 116. By
default, no static trunks are configured on the switch.