Allied Telesis AT-9000 Series - Manual (Page 40)

Chapter 3: Basic Switch Parameters
40
Setting the Switch Information
This procedure allows you to set information about the switch, such as a
switch name, contact, and location. Assigning a name to the switch helps
you identify your switches when you manage them and avoid performing a
configuration procedure on the wrong switch.
To assign a name, location, and contact to a switch, perform the following
procedure:
1. From the home page, hover the cursor over the System tab.
2. From the System tab, hover over System Settings.
The System Settings tab is displayed. See Figure 6 on page 33.
3. Move the cursor to the right and select Contact Information.
The System Contact Information page is displayed. See Figure 11.
Figure 11. System Contact Information Page