Allied Telesis AT-9000 Series User Manual
Page 38
Chapter 3: Basic Switch Parameters
38
4. Configure the following parameters as necessary:
Telnet— Selecting this field enables a Telnet server on the switch.
To disable a Telnet server on the switch, uncheck the box next to
the Telnet field. This parameter is optional.
SSH— Selecting this field enables an SSH server on the switch.
To disable an SSH server on the switch, uncheck the box next to
the SSH field. This parameter is optional.
Note
Both the Remote Log and Server IP Address fields are used only to
set a remote log server. For information on these fields, see “Setting
a Remote Log Server” on page 39.
Remote Log— Check or uncheck the box to enable or disable
remote logging.
Server IP Address— This field is only used for the remote log
server.
5. Click Apply.
6. Click SAVE to save your changes on the switch.