Allied Telesis AT-9000 Series - Manual (Page 62)

Chapter 4: Setting Port Parameters
62
Changing the Port Settings
You can change the settings of one port at a time. Use the following
procedure to change the port settings or reset a port to its default value.
To change the port settings, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 20 on page 59.
2. From the Switching tab, hover over Port.
The Port tab expands to the right.
3. From the Port tab, move the cursor to the right and select Port
Configuration.
The Port Configuration page is displayed. See Figure 21 on page 59.
4. Click Edit next to the port that you want to modify.
The Port Configuration Modify page is displayed. See Figure 22 on
page 63.