Allied Telesis AT-9000 Series - Manual (Page 86)

Chapter 6: Setting Port Mirroring
86
Specifying Direction Type
To specify source ports and type of packet direction, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 20 on page 59.
2. From the Switching tab, hover over Port.
The Port tab is displayed.
3. From the Port tab, move the cursor to the right and select Mirroring
from the drop-down menu.
The Port Mirroring List page is displayed. See Figure 29 on page 83.
4. Click Edit next to the port that you want to specify as a transmitting or
receiving port mirror.
Note
You cannot select the destination port.
The Modify Port Mirroring Page is displayed. See Figure 30.
Figure 30. Modify Port Mirroring Page
Note
The Interface field indicates the port number.