Allied Telesis AT-9000 Series - Manual (Page 200)

Chapter 18: Setting IPv4 and IPv6 Management
200
Assigning an IPv4 Address
Use one of the following procedures to assign a static or DHCP IPv4
address to the switch.
 “Assigning a Static IPv4 Address”
 “Assigning a DHCP IPv4 Address” on page 201
Assigning a Static
IPv4 Address
To assign a static IPv4 address, do the following:
1. Hover the cursor over the Management tab.
The Management tab is displayed. See Figure 69.
Figure 69. Management Tab
2. From the Management tab drop-down menu, select IP.
The IP Management Configuration page with the Static IP Address
field selected is displayed. See Figure 70.
Figure 70. IP Management Configuration Page with Static IP Address