Allied Telesis AT-9000 Series - Manual (Page 204)

Chapter 18: Setting IPv4 and IPv6 Management
204
Assigning an IPv6 Address
To assign an IPv6 address to the switch, do the following:
1. Hover the cursor over the Management tab.
The Management tab is displayed. See Figure 69 on page 200.
2. From the Management tab drop-down menu, select IPv6.
The IPv6 Management Configuration page is displayed. See
Figure 72.
Figure 72. IPv6 Management Configuration Page
3. Assign a VLAN to the IPv6 address by using the pull-down menu next
to the Interface Name field.
You can only select a VLAN that you have configured previously. For
information about how to assign a VLAN, see Chapter 11, “Setting
Port-based and Tagged VLANs” on page 125.
4. Enter an IPv6 address in the IP Address field in the following format:
nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn