Allied Telesis AT-9000 Series - Manual (Page 187)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
187
Enabling 802.1x Port-based Authentication on the Switch
To enable the 802.1x port-based Authentication feature on a switch, do
the following:
1. Hover the cursor over the Security tab.
The Security tab is displayed. See Figure 57 on page 166.
2. From the Security tab drop-down menu, select 802.1x Port
Authentication.
The 802.1x Authentication page is displayed. See Figure 64.
Figure 64. 802.1x Authentication Page
3. Use the pull-down menu next to the Status field to select Enabled.
4. Click Apply.