Allied Telesis AT-9000 Series - Manual (Page 1110)

Chapter 68: LLDP and LLDP-MED Commands
1082
NO LLDP MED-NOTIFICATIONS
Syntax
no lldp med-notifications
Parameters
None
Mode
Port Interface mode
Description
Use this command to configure the switch not to send LLDP-MED
topology change notifications when devices are connected to or
disconnected from the specified ports.
Confirmation Command
“SHOW LLDP INTERFACE” on page 1093
Example
This example configures the switch not to send LLDP-MED topology
change notifications when devices are connected to or removed from port
19:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.19
awplus(config-if)# no lldp med-notifications