Allied Telesis AT-9000 Series - Manual (Page 928)

Chapter 61: 802.1x Port-based Network Access Control Commands
900
AUTH REAUTHENTICATION
Syntax
auth reauthentication
Parameters
None
Mode
Port Interface mode
Description
Use this command to activate reauthentication on the authenticator ports.
The clients must periodically reauthenticate according to the time interval
set with “AUTH TIMEOUT REAUTH-PERIOD” on page 902.
Confirmation Command
“SHOW AUTH-MAC INTERFACE” on page 923 or “SHOW DOT1X
INTERFACE” on page 928
Example
This example activates reauthentication on ports 21 and 22:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.21,port1.0.22
awplus(config-if)# auth reauthentication