Service https, Service https 5, Browser server with “service https” on – Allied Telesis AT-9000 Series User Manual
Page 1383
Advertising
AT-9000 Switch Command Line User’s Guide
1355
SERVICE HTTPS
Syntax
service https
Parameters
None
Mode
Global Configuration mode
Description
Use this command to activate the HTTPS web server on the switch. The
switch supports secure HTTPS web browser management sessions when
the server is activated. Here are the preconditions to activating the server:
The non-secure HTTP server on the switch must be disabled. For
instructions, refer to “NO SERVICE HTTP” on page 1330.
The switch must have an HTTPS certificate that was designated as
the active certificate with the IP HTTPS CERTIFICATE command.
Confirmation Command
Example
This example activates the HTTPS web server on the switch:
awplus> enable
awplus# configure terminal
awplus(config)# service https
Advertising