Allied Telesis AT-9000 Series - Manual (Page 1143)

AT-9000 Switch Command Line User’s Guide
1115
Displaying the ARP Table
To display the ARP table on the switch, use the SHOW ARP command in
the User Exec mode or the Privileged Exec mode. Here is the format of the
command:
awplus# show arp
An example is shown in Figure 189.
Figure 189. SHOW ARP Command
The fields are described in Table 112 on page 1122.
IP ARP
ARP Cache Timeout ......... 300 seconds
Total ARP Entries ......... 215
IP Address MAC Address Interface Port Type
-----------------------------------------------------------------
149.122.34.4
0006.5bb2.4421 vlan2 port1.0.2 Dynamic
149.122.34.12 00a0.d218.eea1 vlan2 port1.0.3 Dynamic
149.122.34.21 00a0.c357.3214 vlan2 port1.0.4 Dynamic
149.122.35.1 00a0.64b1.76a5 vlan8 port1.0.7 Dynamic