Allied Telesis AT-S95 CLI - Manual (Page 106)

Page 94
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
show interfaces description
The show interfaces description Privileged EXEC mode command displays the description for all configured
interfaces.
Syntax
show interfaces description [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — Valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays descriptions of configured interfaces.
1/g15 1G-Copper -- -- -- -- Down -- --
1/g16 1G-Copper -- -- -- -- Down -- --
1/g17 1G-Copper -- -- -- -- Down -- --
1/g18 1G-Copper -- -- -- -- Down -- --
1/g19 1G-Copper -- -- -- -- Down -- --
Console# show interfaces description
Port Description
---- -----------
1/g1 lab
1/g2
1/g3
1/g4
1/g5
1/g6
ch1
ch2