Allied Telesis AT-S95 CLI - Manual (Page 282)

Page 270
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Syntax
show users
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about the active users.
show sessions
The show sessions User EXEC mode command lists open Telnet sessions.
Syntax
show sessions
Default Configuration
There is no default configuration for this command.
Console show users
Username Protocol Location
---------- ----------- ------------
Bob Serial
John SSH 172.16.0.1
Robert HTTP 172.16.0.8
Betty Telnet 172.16.1.7
Console show users
Username Protocol Location
---------- ----------- ------------
manager Serial 0.0.0
Admin HTTP 192.168.1.960.
Bob Telnet 192.168.1.120
bill Telnet 192.168.1.101
console#