Qos trust(global) – Allied Telesis AT-S95 CLI User Manual
Page 180
Page 168
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Syntax
wrr-queue cos-map queue-id cos1...cos8
no wrr-queue cos-map [queue-id]
Parameters
•
queue-id — Specifies the queue number to which the CoS values are mapped.
•
cos1...cos8 — Specifies CoS values to be mapped to a specific queue. (Range: 0-7)
Default Configuration.
Command Mode
Global Configuration mode
User Guidelines
Queue 4 is reserved for stacking.
Example
The following example maps CoS 7 to queue 2.
qos trust(Global)
The qos trust Global Configuration mode command configures the System to basic mode and the trust state. Use
the no form to return untrusted state.
Syntax
qos trust {cos | dscp}
no qos trust
Value (VPT)
Queue
0
2
1
1
2
1
3
2
4
3
5
3
6
4
7
4
Console(config)# wrr-queue cos-map 2 7