Allied Telesis AT-S95 CLI - Manual (Page 276)

Page 264
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
reload
The reload Privileged EXEC mode command reloads the operating system.
Syntax
reload
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Caution should be exercised when resetting the device, to ensure that no other activity is being performed. In
particular, the user should verify that no configuration files are being downloaded at the time of reset.
Example
The following example reloads the operating system.
resume
Syntax
resume [connection]
Default Configuration
The default connection number is that of the most recent connection.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following command switches to open Telnet session number 1.
Console# reload
This command will reset the whole system and disconnect your current session. Do you want
to continue (y/n) [n]?
Console> resume 1