Allied Telesis AT-S95 CLI - Manual (Page 183)

QoS Commands
Page 171
Parameters
•
dscp-queue — Indicates the DSCP to queue map.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the DSCP port-queue map.
The following table describes the significant fields shown above.
Console> show qos map
Dscp-queue map:
d1 : d2 0 1 2 3 4 5 6 7 8 9
-- : -- -- -- -- -- -- -- -- -- -- --
0 : 01 01 01 01 01 01 01 01 01 01
1 : 01 01 01 01 01 01 02 02 02 02
2 : 02 02 02 02 02 02 02 02 02 02
3 : 02 02 03 03 03 03 03 03 03 03
4 : 03 03 03 03 03 03 03 03 04 04
5 : 04 04 04 04 04 04 04 04 04 04
6 : 04 04 04 04
Column Description
d1 Decimal Bit 1 of DSCP
d2 Decimal Bit 2 of DSCP
01 - 04 Queue numbers