Allied Telesis AT-S95 CLI - Manual (Page 198)

Page 186
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
The following table describes significant fields shown above:
show rmon alarm
The show rmon alarm User EXEC mode command displays alarm configuration.
Syntax
show rmon alarm number
Parameters
•
number — Specifies the alarm index. (Range: 1 - 65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays RMON 1 alarms.
Field Description
Index An index that uniquely identifies the entry.
OID Monitored variable OID.
Owner The entity that configured this entry.
Console> show rmon alarm 1
Alarm 1
-------
OID: 1.3.6.1.2.1.2.2.1.10.1
Last sample Value: 878128
Interval: 30
Sample Type: delta
Startup Alarm: rising
Rising Threshold: 8700000
Falling Threshold: 78
Rising Event: 1
Falling Event: 1
Owner: CLI