Allied Telesis AT-S95 CLI - Manual (Page 286)

Page 274
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Syntax
show version [unit unit]
Parameters
•
unit— Specifies the number of the unit. (Range: 1-6)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays system version information (only for demonstration purposes).
.
Console> show version
Unit
SW version Boot version HW version
---- ---------- ------------ ----------
1 v1.1.0.29 1.0.1.06 01.00.00
2 v1.1.0.29 1.0.1.06 01.00.00
3 v1.1.0.29 1.0.1.06 01.00.00
4 v1.1.0.29 1.0.1.06 01.00.00
5 v1.1.0.29 1.0.1.06 01.00.00
6 v1.1.0.29 1.0.1.06 01.00.00
console#
Console> show version
SW version 1.0.0.0
(date 23-Jul-2004 time 17:34:19)
Boot version 1.0.0.0 (date 11-Jan-2004 time 11:48:21)
HW version 1.0.0
Unit SW version Boot version HW version
---- ---------- ------------ ----------
1 1.0.0.0 2.178 1.0.0
2 1.0.0.0 2.178 1.0.0