Allied Telesis AT-S95 CLI - Manual (Page 51)

Address Table Commands
Page 39
Default Configuration
The default setting is 300 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
In this example the bridge aging time is set to 250.
clear bridge
The clear bridge Privileged EXEC mode command removes any learned entries from the forwarding database.
Syntax
clear bridge
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, the bridge tables are cleared.
port security
The port security Interface Configuration mode command enables port security on an interface. Use the no form
of this command to disable port security on an interface.
Syntax
port security [forward | discard | discard-shutdown] [trap seconds]
no port security
Console(config)# bridge aging-time 250
Console# clear bridge